Close
Drive Masterflex L/S 100RPM 115/230
SKU
CP/MF/AO/P-07528-30
Brand
COLE-PARMER
Pre-order (Deliver in 8 to 12 weeks)
INCLUDES
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.
KEY FEATURES
- Flow rate 0.06 to 3400 mL/min�flow rate depends on drive rpm, pump head, and tubing size
- Three digit LED display shows motor rpm � confirm speed setting at a glance
- Reversible motor�purge tubing before or after pumping; pump fluid in either direction
- LED indicators confirm motor direction
- Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
- Separate speed and power (on/off) control � maintain speed setting while turning pump on/off
- Stackable, splash-resistant ABS plastic housing; IP33 rated
- Remote control capabilities via a DB9 female connector on back of drive
- Speed control input: 4 to 20 mA or 0 to 10 VDC
- Pump direction (CW/CCW) via open collector or contact closure
- Start/stop via open collector or contact closure
- Membrane keypad for easy up-front control of speed, direction, and start/stop
- Designed with speed range of 1 to 100 rpm
MORE ABOUT THIS ITEM
These accurate analog console drives have powerful motors, speed display, and �0.25% speed control for precise flow regulation�ideal for metering applications. Remote speed control requires�DB9 male connector�or�cable assembly. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL);�control start/stop via footswitch�or�handheld remote.
Specifications & Description
- Pump Series - L/S
- Cloud Connected - No
- Control Type - Digital Variable Speed
- Min RPM (rpm) - 1
- Max RPM (rpm) - 100
- Speed - Variable
- Speed Control - �0.25% (1 rpm at 600 and 300 rpm; 0.1 rpm at 100 rpm)
- Max Flow Rate (mL/min) - 580
- Min Flow Rate (mL/min) - 0.06
- Reversible Motor - Yes
- Digital Dispensing - No
- No. of Pump Heads Accepted - 4
- Type of Pump Heads Accepted - Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm, Cytoflow
- Motor (watts) - 75
- Drive IP rating - IP 33
- Washdown Capable - No
- Power (VAC) - 90 to 260
- Power (amps) - 2.2
- Power (Hz) - 50/60
- Drive Length (in) - 10.7968
- Drive Width (in) - 8.3125
- Drive Height (in) - 8.5
- Drive Length (mm) - 274
- Drive Width (mm) - 211
- Drive Height (mm) - 216
- Open-Head Sensor - No
- Housing Material - ABS Plastic and Aluminum
- Motor hp - 1/10
- Remote I/O - 4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
- Description - L/S Variable-Speed Drive w/ Remote I/O; 100 rpm
INCLUDES
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.
KEY FEATURES
- Flow rate 0.06 to 3400 mL/min—flow rate depends on drive rpm, pump head, and tubing size
- Three digit LED display shows motor rpm — confirm speed setting at a glance
- Reversible motor—purge tubing before or after pumping; pump fluid in either direction
- LED indicators confirm motor direction
- Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
- Separate speed and power (on/off) control — maintain speed setting while turning pump on/off
- Stackable, splash-resistant ABS plastic housing; IP33 rated
- Remote control capabilities via a DB9 female connector on back of drive
- Speed control input: 4 to 20 mA or 0 to 10 VDC
- Pump direction (CW/CCW) via open collector or contact closure
- Start/stop via open collector or contact closure
- Membrane keypad for easy up-front control of speed, direction, and start/stop
- Designed with speed range of 1 to 100 rpm
MORE ABOUT THIS ITEM
These accurate analog console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires DB9 male connector or cable assembly. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL); control start/stop via footswitch or handheld remote.
Specifications & Description
- Pump Series - L/S
- Cloud Connected - No
- Control Type - Digital Variable Speed
- Min RPM (rpm) - 1
- Max RPM (rpm) - 100
- Speed - Variable
- Speed Control - ±0.25% (1 rpm at 600 and 300 rpm; 0.1 rpm at 100 rpm)
- Max Flow Rate (mL/min) - 580
- Min Flow Rate (mL/min) - 0.06
- Reversible Motor - Yes
- Digital Dispensing - No
- No. of Pump Heads Accepted - 4
- Type of Pump Heads Accepted - Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm, Cytoflow
- Motor (watts) - 75
- Drive IP rating - IP 33
- Washdown Capable - No
- Power (VAC) - 90 to 260
- Power (amps) - 2.2
- Power (Hz) - 50/60
- Drive Length (in) - 10.7968
- Drive Width (in) - 8.3125
- Drive Height (in) - 8.5
- Drive Length (mm) - 274
- Drive Width (mm) - 211
- Drive Height (mm) - 216
- Open-Head Sensor - No
- Housing Material - ABS Plastic and Aluminum
- Motor hp - 1/10
- Remote I/O - 4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
- Description - L/S Variable-Speed Drive w/ Remote I/O; 100 rpm
| Brand | COLE-PARMER |
|---|
Write Your Own Review
Who Viewed This Also Viewed
Validate your login