Close
Pumphead Mlex 8-Channel 3Roll
SKU
CP/MF/AO/P-07519-05
Brand
COLE-PARMER
Pre-order (Deliver in 8 to 12 weeks)
Synchronous, multichannel flow from up to 8 channels
- Cartridges snap in and out for fast tubing changes�no need to remove pump head from the drive
- Load pump heads with 1 to 8 cartridges
- Mix large and small cartridges�one large cartridge occupies the same space as two small ones
- Flow rate 0.074 to 1700 mL/min with microbore or L/S tubing�flow rate depends on drive rpm, cartridge, and tubing size
- Accepts 1 to 8 small or 1 to 4 large cartridges
- Require drives with a minimum of 1/10 hp and a maximum of 600 rpm
- Constructed with stainless steel rotor and bearings with polysulfone ends
MORE ABOUT THIS ITEM
Each pump head system is composed of a heavy-duty pump head and two sizes of snap-in tubing cartridges, each with individually adjustable occlusion settings (order cartridges separately). The occlusion �wedge� design provides accurate and more balanced flow control. Recommended for use with small cartridge 07519-80 and large cartridge 07519-70.
Specifications & Description
- Pump Series - L/S
- Number of Channels - 8
- Max Flow Rate (mL/min) - 6800
- Max Flow Rate Per Channel (mL/min) - 1700
- Min Flow Rate Per Channel (mL/min) - 0.005
- Max. Number of Cartridges (Large) - 4
- Max. Number of Cartridges (Small) - 8
- Housing Material - Polysulfone (PSF)
- Tubing Retention - Stopped Tubing or Manual
- Occlusion - Adjustable Tangential
- Optimum RPM Range (rpm) - 0.02 to 600
- Rollers - 3
- Rotor Material - Anodized Aluminum
- Suction Lift (ft) - 29
- Suction Lift (m) - 8.8
- Gear Ratio - 1:1
- Tubing sizes accepted - Two-stop microbore, L/S 13, L/S 14, L/S 16, L/S 25, L/S 17
- Volume Per Revolution With L/S 13 Tubing (mL) - 0.06
- Volume Per Revolution With L/S 14 Tubing (mL) - 0.21
- Volume Per Revolution With L/S 16 Tubing (mL) - 0.8
- Volume Per Revolution With L/S 25 Tubing (mL) - 1.7
- Volume Per Revolution With L/S 17 Tubing (mL) - 2.8
- Length (in) - 5.75
- Width (in) - 4.375
- Height (in) - 4
- Length (mm) - 14.6
- Width (mm) - 111
- Height (mm) - 102
- Open-Head Sensor - No
- Description - L/S Multichannel Cartridge Pump Head for Microbore and Precision Tubing, 8-Channel, 3-Roller
Synchronous, multichannel flow from up to 8 channels
- Cartridges snap in and out for fast tubing changes—no need to remove pump head from the drive
- Load pump heads with 1 to 8 cartridges
- Mix large and small cartridges—one large cartridge occupies the same space as two small ones
- Flow rate 0.074 to 1700 mL/min with microbore or L/S tubing—flow rate depends on drive rpm, cartridge, and tubing size
- Accepts 1 to 8 small or 1 to 4 large cartridges
- Require drives with a minimum of 1/10 hp and a maximum of 600 rpm
- Constructed with stainless steel rotor and bearings with polysulfone ends
MORE ABOUT THIS ITEM
Each pump head system is composed of a heavy-duty pump head and two sizes of snap-in tubing cartridges, each with individually adjustable occlusion settings (order cartridges separately). The occlusion “wedge†design provides accurate and more balanced flow control. Recommended for use with small cartridge 07519-80 and large cartridge 07519-70.
Specifications & Description
- Pump Series - L/S
- Number of Channels - 8
- Max Flow Rate (mL/min) - 6800
- Max Flow Rate Per Channel (mL/min) - 1700
- Min Flow Rate Per Channel (mL/min) - 0.005
- Max. Number of Cartridges (Large) - 4
- Max. Number of Cartridges (Small) - 8
- Housing Material - Polysulfone (PSF)
- Tubing Retention - Stopped Tubing or Manual
- Occlusion - Adjustable Tangential
- Optimum RPM Range (rpm) - 0.02 to 600
- Rollers - 3
- Rotor Material - Anodized Aluminum
- Suction Lift (ft) - 29
- Suction Lift (m) - 8.8
- Gear Ratio - 1:1
- Tubing sizes accepted - Two-stop microbore, L/S 13, L/S 14, L/S 16, L/S 25, L/S 17
- Volume Per Revolution With L/S 13 Tubing (mL) - 0.06
- Volume Per Revolution With L/S 14 Tubing (mL) - 0.21
- Volume Per Revolution With L/S 16 Tubing (mL) - 0.8
- Volume Per Revolution With L/S 25 Tubing (mL) - 1.7
- Volume Per Revolution With L/S 17 Tubing (mL) - 2.8
- Length (in) - 5.75
- Width (in) - 4.375
- Height (in) - 4
- Length (mm) - 14.6
- Width (mm) - 111
- Height (mm) - 102
- Open-Head Sensor - No
- Description - L/S Multichannel Cartridge Pump Head for Microbore and Precision Tubing, 8-Channel, 3-Roller
| Brand | COLE-PARMER |
|---|
Write Your Own Review
Who Viewed This Also Viewed
-
-
ME25/20 Membrane Circles, Mixed esters, 0.45µm, 5mm black grid, 47mm 100/pk Brand: CYTIVA WHATMAN™ SKU: WH/10406512 -
-
-
Validate your login